IC-220 G, S & M
IC-220 G, S, M is a two-component, water-based polyurethane coating system available in gloss, satin, and matte finishes. It is designed to protect and enhance various surfaces, including concrete and polymer materials, while offering excellent UV, chemical, and abrasion resistance. Approved by the Canadian Food Inspection Agency (CFIA).
- Very low VOC content: <10 g/L
- Fast drying & early water resistance
- Long pot life
- Excellent adhesion to various substrates
- Superior UV and chemical resistance
- Outstanding visual appearance (Gloss / Satin / Matte)
Parameter | Value |
Packaging | Part A: 5 units, Part B: 1 unit |
Mix Ratio (by volume) | A:B = 5:1 (100:20) |
Mix Ratio (by weight) | A:B = 100:22 |
Pot Life (454 g @ 25°C) | 1–3 hours |
Shelf Life | 12 months (sealed, cool/dry storage) |
Property | Part A | Part B | Mix |
Color | Upon request | Amber | Upon request |
Solids Content (by volume) | 53% | 87% | 60.4% |
Solids Content (by weight) | 55% | 100% | 64% |
Specific Gravity | 1.04 | 1.15 | 1.06 |
Viscosity @ 25°C (Zahn #4) | — | — | 18–22 sec |
Gloss @ 60° (Gloss) | — | — | 90% |
Gloss @ 60° (Satin) | — | — | 35% |
Gloss @ 60° (Matte) | — | — | 13% |
Test | Value |
Abrasion Resistance (ASTM D4060, CS-17) | 0.2 g loss |
Water Absorption (ASTM D570) | 1.5% |
Bond Strength (ASTM D4541) | >300 psi (substrate rupture) |
Impact Resistance (ASTM D2794) | 16/2 lbs. (direct/reverse) |
Hardness (Shore D, ASTM D2240) | N/A |
Use | Thickness | Coverage |
General Application | 4–6 mils | 250–400 ft²/gal |
Recoat Window | — | 4–6 hours |
Temperature | Pedestrian Traffic | Normal Traffic | Heavy Equipment |
23°C (73°F) | 12–24 hours | 24–48 hours | >72 hours |
- Surface must be clean, dry, and properly profiled (ICRI-CSP 3–4).
- Mechanically prepare surfaces via shot blasting or diamond grinding.
- Mix each component separately (2 mins), then combine A + B (3 mins @ 300–450 rpm).
- Apply using a rubber rake and back-roll with roller. Avoid puddling.
- Clean tools immediately with soapy water followed by solvent rinse.
- Once cured, the product can only be removed mechanically.
- Application temp: 15–30°C (59–86°F)
- Max relative humidity: 80%
- Substrate moisture content must be <4%
- Avoid use on porous or ground-level outdoor substrates
- Protect from moisture during first 24 hours
- May discolor with prolonged UV exposure
- Avoid skin and eye contact.
- Use NIOSH/MSHA-approved organic vapor respirator.
- Wear gloves and safety goggles.
- Refer to SDS before use.