Three-component, pre-proportioned epoxy coving and detailing mortar kit designed for vertical applications. Includes solvent-free epoxy resin (A), hardener (B), and select quartz aggregates (C). Provides high abrasion and impact resistance. Seamless transition system for floor-to-wall finishes.
- High bond strength and mechanical resistance
- Low VOC and low odor
- Pre-proportioned for easy and accurate mixing
- Sag-resistant; ideal for vertical trowel application
Item | Value |
Packaging | 16.4 kg (10 L) kit |
Color | Upon Request |
Yield | ~30 linear feet per kit (6" high cove @ 4 mm thick, 25 mm radius) |
Shelf Life | 12 months (sealed, away from heat/moisture/light) |
Mix Ratio by Volume | A:B:C = 2L / 1L / 13 kg sand |
Mix Full Units Only | Yes |
Gel Time (100 g @ 25°C) | 25–30 minutes |
VOC | 45 g/L |
Min | Max |
0°C | 50°C (32°F–122°F) |
Substrate Temp | Open Time (min) | Overcoat (hrs min/max) | Normal Traffic (days) | Chemical Exposure (days) |
10°C (50°F) | 70 | 24–96 | 10 | 10 |
20°C (68°F) | 45 | 8–48 | 7 | 7 |
30°C (86°F) | 3 days | 5–24 | 5 | 5 |
Temp | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | N.A | 1 day | 7 days |
20°C (68°F) | 8 hrs | 3 days | 5 days |
30°C (86°F) | 6 hrs | 2 days | 5 days |
Property | Value |
Bond Strength (ASTM D4541) | >250 psi (substrate ruptures) |
Shore D Hardness (ASTM D2240) | 82–85 |
Abrasion Resistance (ASTM D4060) | 0.15 g loss (CS17, 1000g, 1000 cycles) |
Tensile Strength (ASTM D638) | 5200 psi |
Compressive Strength (ASTM D695) | 6000 psi |
Elongation (ASTM D638) | 6.7% |
Impact Resistance (ASTM D2794) | 2.5 ft. lb. |
Fire Rating (ASTM E84 / CAN/ULC S102) | Flame Spread: 5; Smoke Developed: 94 (Class A) |
RESTRICTIONS
- Application temp: 15°C–30°C (59°F–86°F)
- Max RH: 85%
- Substrate temperature must be 15°C above dew point
- Substrate moisture content must be < 4%
- Avoid porous ground-level substrates
- Protect from water, humidity, and condensation for first 24 hrs
- Surface may discolor under UV light