is a 100% solid, two component, Vapor Reduction Membrane self-leveling epoxy coatings designed to restore floor concrete and improve their appearance. It can be colored or mixed with various colors or metallic powder to deliver opaque and glossy finish floors. They show excellent mechanical properties and chemical resistance. It has very good resistance to crystallization and durability while maintaining its artistic look.
- Vapor reduction membrane with decorative finish
- Dense surface: bacteria/moisture resistant, easy to clean
- Strong adhesion to various substrates
- High chemical and mechanical resistance
- Can be colored or metallic for a glossy, artistic finish
Parameter | Value |
Packaging | 11.35 L (3 US gal), 56.7 L (15 US gal) |
Color | Part A: Upon Request; Part B: Clear to Amber |
Mix Color | Upon Request |
Mix Ratio (by volume) | A:B = 2:1 (100:50) |
Mix Ratio (by weight) | A:B = 100:39:45 |
Gel Time (100g @ 25°C) | 55–65 minutes |
Pot Life | N/A |
Solids Content | 100% (weight & volume) |
VOC | Not stated |
Viscosity @ 25°C | Clear: A: 2500–2700, B: 200–400, Mix: 1500–1800 cP Colors: A: 2500–3200, B: 200–400, Mix: 1300–1600 cP |
Specific Gravity | Clear: A: 1.14–1.16, B: 0.9–1.0 Colors: A: 1.15–1.20, B: 0.9–1.0 |
Thinner Recommended | Xylene |
Shelf Life | 12 months (sealed, away from moisture/extremes) |
Use | Recommended Thickness | Coverage |
Primer | 6–8 mils | |
Finish Coat | 8–12 mils | ~200 ft²/gal @ 8 mils |
Slurry Application (50% Silica) | 12 mils | ~125 ft²/gal |
Trowel Epoxy (85% Silica) | 24 mils | ~60 ft²/gal |
Test | Value |
CAN/ULC S102, ASTM E84 | Flame Spread: 5; Smoke: 94 (Class A) |
Property | Value |
Bond Resistance (ASTM D4541) | >300 psi (substrate ruptures) |
Hardness (Shore D, ASTM D2240) | Not stated |
Abrasive Resistance (CS17 / 1000g / 1000 cycles) | 0.10 g loss |
Tensile Strength (ASTM D638) | 6500 psi |
Compressive Strength (ASTM D695) | 12000–13000 psi |
Elongation (ASTM D638) | 6–7% |
Permeability (ASTM D570) | 0.3% |
Substrate Temp | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | N/A | N/A | N/A |
20°C (68°F) | 1 day | 3 days | 7 days |
30°C (86°F) | 16 hrs | 2 days | 5 days |
Restrictions
- Application temperature: 15°C–30°C (59°F–86°F)
- Max relative humidity: 85%
- Substrate moisture content: <4%
- Avoid use on porous surfaces prone to humidity transfer
- Protect from moisture/condensation during first 24 hrs of cure
- May discolor under UV exposure