IC-100 SFC
SUPER FAST EPOXY

IC-100-SFC is 100% solid, two component, Super-fast curing epoxy coating system, designed to restore concrete floors with a recoat time between 1-3 hours. It shows excellent mechanical properties.
Advantages
  • Super-fast curing (1–3 hour recoat time)
  • Dense surface: bacteria/moisture resistant, easy to clean
  • Excellent adhesion between coats and to various substrates
  • 100% solids, solvent-free formulation

Parameter

Value

Packaging

11.35 L (3 US gal), 56.7 L (15 US gal)

Color

Part A: Upon Request; Part B: Clear to Amber

Mix Color

Upon Request

Mix Ratio (by volume)

A:B = 2:1 (100:50)

Mix Ratio (by weight)

A:B = 100:39–45

Gel Time (100g @ 25°C)

10–15 minutes

Pot Life (100g @ RT)

5–10 minutes

Solids Content

100% (weight & volume)

VOC

31 g/L

Viscosity @ 25°C

Clear: A: 1200–1400, B: 200–400, Mix: 1500–1800 cP

Colors: A: 1500–1900, B: 200–400, Mix: 2300–2500 cP

Specific Gravity

Clear: A: 1.10–1.15, B: 0.9–1.0

Colors: A: 1.15–1.20, B: 0.9–1.0

Thinner Recommended

Xylene

Shelf Life

12 months (sealed, away from moisture/extremes)


Use

Recommended Thickness

Coverage

Primer

6–8 mils


Finish Coat

8–12 mils

~200 ft²/gal @ 8 mils

Slurry Application (50% Silica)

12 mils

~125 ft²/gal

Trowel Epoxy (85% Silica)

24 mils

~60 ft²/gal


Test

Value

CAN/ULC S102, ASTM E84

Flame Spread: 5; Smoke: 94 (Class A)


Property

Value

Bond Resistance (ASTM D4541)

>300 psi (substrate ruptures)

Hardness (Shore D, ASTM D2240)

85–90

Abrasive Resistance (CS17 / 1000g / 1000 cycles)

0.10 g loss

Tensile Strength (ASTM D638)

6500 psi

Compressive Strength (ASTM D695)

12000–13000 psi

Elongation (ASTM D638)

6–7%

Permeability (ASTM D570)

0.8%


Substrate Temp

Foot Traffic

Light Traffic

Full Cure

10°C (50°F)

2 days

5 days

10 days

20°C (68°F)

1 day

2 days

7 days

30°C (86°F)

12 hrs

1 day

5 days


Restrictions
  • Application temperature: 15°C–30°C (59°F–86°F)
  • Max relative humidity: 85%
  • Substrate moisture content: <4%
  • Avoid use on porous surfaces prone to humidity transfer
  • Protect from moisture/condensation during first 24 hrs of cure
  • May discolor under UV exposure