IC-100 SC is a high solid, special grade, two component, self-leveling epoxy coating designed to restore floors concrete and improve their appearance. It can be mixed with various colors or metallic powder to deliver opaque and glossy finish floors. It shows excellent mechanical properties and good chemical resistance. It has very good durability while maintaining its artistic look.
- Dense surface: resistant to bacteria and moisture, easy to clean
- May apply several layers with excellent self-adhesion
- Strong adhesion on multiple substrate types
- Durable and decorative finish with color or metallic effects
Parameter | Value |
Packaging | 10.59 L (2.8 US gal), 15 L (4 US gal) |
Color | Part A: Upon Request; Part B: Clear to Amber |
Mix Color | Upon Request |
Mix Ratio (by volume) | A:B = 3:1 (100:33) |
Mix Ratio (by weight) | A:B = 100:29 |
Gel Time (100g @ 25°C) | 45–60 minutes |
Solids Content | 100% (weight & volume) |
VOC | >40 g/L |
Viscosity @ 25°C | A: 4000–5000, B: 550–650, Mix: 1800–2200 cP |
Specific Gravity | A: 1.15, B: 1.01, Mix: 1.11 |
Thinner Recommended | Xylene |
Shelf Life | 12 months (sealed, away from moisture/extremes) |
Use | Recommended Thickness | Coverage |
Primer | 6–8 mils | |
Finish Coat | 8–12 mils | ~200 ft²/gal @ 8 mils |
Slurry Application (50% Silica) | 12 mils | ~125 ft²/gal |
Test | Value |
CAN/ULC S102, ASTM E84 | Flame Spread: 5; Smoke: 94 (Class A) |
Property | Value |
Bond Resistance (ASTM D4541) | >300 psi (substrate ruptures) |
Hardness (Shore D) | 85–90 |
Abrasive Resistance (CS17 / 1000g / 1000 cycles) | 0.10 g loss |
Tensile Strength (ASTM D638) | 6500 psi |
Compressive Strength (ASTM D695) | 12000–13000 psi |
Elongation (ASTM D638) | 5–6% |
Permeability (ASTM D570) | 0.3% |
Substrate Temp | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | 2 days | 3 days | 7 days |
20°C (68°F) | 1 day (24 hrs) | 3 days | 7 days |
30°C (86°F) | 16 hrs | 2 days | 5 days |
Restrictions
- Application temperature: 15°C–30°C (59°F–86°F)
- Max relative humidity: 85%
- Substrate moisture content: <4%
- Avoid use on porous surfaces prone to humidity transfer
- Protect from moisture/condensation during first 24 hrs of cure
- May discolor under UV exposure