IC-100- 90 is a two-component, 100% solid, low modulus epoxy system, designed to maintain the integrity of concrete surfaces. It is moisture-insensitive, prevents water infiltration, and provides excellent adhesion on concrete, primers and mid coats. It shows very good mechanical properties especially, good elongation and excellent tear resistance. It is suitable for rapid cure requirements and low temperature application as floor topcoat and self leveling applications.
- Low odor, solvent-free
- Crystallization free
- Good flexibility and stress relief
- Resistant to mechanical movements
- Rapid cure
- Moisture tolerant during cure
- Easy to clean, bacteria- and moisture-resistant surface
Parameter | Value |
Packaging | 7.56 L (2 US gal) |
Color | Part A: Upon Request; Part B: Clear to Amber |
Mix Color | Upon Request |
Mix Ratio (by volume) | A:B = 1:1 (100:100) |
Mix Ratio (by weight) | A:B = 100:86 |
Gel Time (454g @ 25°C) | 18–25 minutes |
Solids Content | 100% (weight & volume) |
VOC | Mix: 36.4 g/L (Part A: 13.8, Part B: 22.6) |
Viscosity @ 25°C | Part A: 350–425, Part B: 1500–1700 cP |
Specific Gravity | Part A: 0.9–1.0, Part B: 1.08–1.1, Mix: 1.15–1.17 |
Thinner Recommended | Xylene |
Shelf Life | 12 months (sealed, away from moisture/extremes) |
Use | Recommended Thickness | Coverage |
Finish Coat | 10 mils (1st coat), 20 mils (2nd coat) | ~133 ft²/gal @ 12 mils |
Primer | SCI-100 MVB SFC | |
Finish Coat | SCI-100 or SCI-300-8084 SC |
Test | Value |
CAN/ULC S102, ASTM E84 | Flame Spread: 5; Smoke: 94 (Class A) |
Property | Value |
Bond Resistance (ASTM D4541) | 575 psi |
Hardness (Shore D, ASTM D2240) | 60–70 |
Tensile Strength (ASTM D638) | 260 psi |
Elongation (ASTM D638) | 90% |
Compressive Strength (ASTM D695) | 8600–10000 psi |
Moisture Vapor Emission Rate (ASTM E96) | 25 lb./24 hr./1000 ft² |
Substrate Temp | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | 2 days | 5 days | 10 days |
20°C (68°F) | 1 day | 2 days | 7 days |
30°C (86°F) | 12 hrs | 1 day | 5 days |
Restrictions
- Application temperature: 15°C–30°C (59°F–86°F)
- Max relative humidity: 85%
- Substrate moisture content: > 4% acceptable
- Avoid application on porous surfaces prone to humidity transfer
- Protect from moisture/condensation during first 24 hrs of cure
- May discolor under UV exposure