IC-885
IC-885 is a two-component solventborne aliphatic polyaspartic system designed to maintain the integrity of concrete surfaces while providing excellent appearance. It offers outstanding mechanical properties along with UV stability and strong resistance to chemicals and solvents.
- Industrial flooring
- Bridges
- Maintenance facilities
- Aircraft hangar floors
- Car washes
- Areas requiring a durable topcoat
- Low odor
- Aesthetic finish
- Superior mechanical resistance
- Good chemical and physical resistance
- Easy-to-clean, moisture- and bacteria-resistant surface
Parameter | Value |
Packaging | Part A: 4 kg / Part B: 4.3 kg |
Storage | Store between 12°C–28°C in dry, controlled environment |
Solids Content (by weight) | 85% |
VOC (g/L) | Part A: 32 / Part B: 308 / Mix: 170 |
Gel Time (100 g @ 25°C) | 60–90 minutes |
Specific Gravity | A: 1.01 / B: 1.08 |
Mix Ratio (by volume) | A:B = 1:1 (100:100) |
Mix Ratio (by weight) | A:B = 100:107 |
Mixed Viscosity | 150–200 cP |
Working Time | 40–60 minutes |
Tack Free Time (8 mils @ 23°C) | 5–7 hours |
Suggested Number of Coats | 1–2 |
Recoat Time | 4–6 hours (min) / 24 hours (max) |
Foot Traffic | 12–24 hours |
Light Traffic | 2 days |
Full Cure | 7 days |
Shelf Life | 12 months (unopened) |
Color | Clear, Beige, Grey |
Application | Recommended Thickness | Coverage |
Over Flakes | 8–12 mils | 130–200 ft²/gal |
Solid Color | 8 mils | ~200 ft²/gal |
Property | Value |
Compressive Strength (ASTM D695) | 9000–10000 psi |
Bond Strength (ASTM D4541) | 500 psi |
Tensile Strength (ASTM D638) | 6000–7000 psi |
Hardness (Shore D, ASTM D2240) | 75–80 |
Water Vapor Transmission (ASTM E96) | 1 perm |
Elongation (ASTM D638) | 100% |
Abrasion Resistance (ASTM D4060) | 30 mg loss |
Water Absorption (ASTM D570) | 0.2% |
Fire Rating (CAN/ULC S102) | Flame Spread: 5 / Smoke: 94 |
Coefficient of Friction (ASTM D1894) | 0.5 – 0.7 |
Temperature | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | 3 days | 7 days | 10 days |
20°C (68°F) | 2 days | 5 days | 7 days |
30°C (86°F) | 1 day | 3 days | 5 days |
Temperature | Minimum | Maximum |
10°C (50°F) | 1 day | 2 days |
20°C (68°F) | 6 hours | 12 hours |
30°C (86°F) | 4 hours | 8 hours |
Surface must be clean, sound, and dry. Remove all contaminants such as oils, grease, sealers, and dust. Mechanical preparation (shot blasting or grinding) is required to achieve a CSP-3 to CSP-4 profile. Concrete must have a minimum compressive strength of 3500 psi and tensile strength of 215 psi.
Mixing
Pour all of Part B into Part A and mix for approximately 3 minutes until homogeneous. Scrape sides and bottom of the container. Do not mix more material than can be applied within the working time.
Application
Apply using a rubber squeegee and back roll with a lint-free roller to achieve a smooth, uniform finish.
Cleaning
Clean tools with appropriate solvent such as xylene. Once cured, the product can only be removed mechanically.
Restrictions
- Application temperature: 15°C–30°C (59°F–86°F)
- Maximum relative humidity: 85%
- Substrate moisture content must be ≤4%
- Substrate must be at least 3°C above dew point
- Avoid condensation during application
- Do not add solvents or water
- Protect from moisture during first 24 hours