100% solids, two-component self-leveling epoxy coating used to restore concrete floors and enhance appearance. Can be customized with colors or metallic pigments to create opaque, glossy finishes. Offers excellent mechanical strength, chemical resistance, and resistance to crystallization.
- Dense surface resists bacteria and moisture, easy to clean
- Excellent intercoat adhesion for multi-layer application
- Bonds to many substrate types
Item | Value |
Packaging | 11.35 L (3 US gal), 56.7 L (15 US gal) |
Part A Color | Upon Request |
Part B Color | Clear to Amber |
Mixed Color | Upon Request |
Recommended Thickness | Primer: 6–8 mils; Finish Coat: 8–12 mils |
Coverage @ 8 mils | 200 ft²/gal |
Slurry (12 mils, 50% sand) | 125 ft² |
Trowel (24 mils, 85% sand) | 60 ft² |
Shelf Life | 12 months (sealed, away from heat/moisture/light) |
Mix Ratio by Volume | A:B = 2:1 (100:50) |
Mix Ratio by Weight | A:B = 100:39:45 |
Gel Time (100 g @ 25°C) | 55–65 minutes |
Pot Life | N/A |
VOC | 45 g/L |
Thinner Recommended | Xylene |
Component | Clear (cP) | Colors (cP) |
Part A | 1700–1900 | 2500–3200 |
Part B | 150–300 | 150–300 |
Mix | 1500–1800 | 1300–1600 |
Property | Value |
Specific Gravity – Part A | 1.14–1.16 (Clear), 1.15–1.20 (Color) |
Specific Gravity – Part B | 0.9–1.0 |
Bond Strength (ASTM D4541) | >300 psi (substrate ruptures) |
Shore D Hardness (ASTM D2240) | Not specified |
Abrasion Resistance (ASTM D4060) | 0.10 g loss (CS17, 1000g, 1000 cycles) |
Tensile Strength (ASTM D638) | 6500 psi |
Compressive Strength (ASTM D695) | 12000–13000 psi |
Elongation (ASTM D638) | 6–7% |
Coefficient of Friction (ASTM D1894) | 0.5–0.7 |
Water Absorption (ASTM D570) | 0.3% |
Fire Rating (ASTM E84 / CAN/ULC S102) | Flame Spread: 5; Smoke Developed: 94 (Class A) |
Temp | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | N/A | 1 day | 7 days |
20°C (68°F) | 1 day | 3 days | 7 days |
30°C (86°F) | 16 hrs | 2 days | 5 days |
RESTRICTIONS
- Application temp: 15°C–30°C (59°F–86°F)
- Max RH: 85%
- Substrate must be 15°C and <4% moisture content
- Avoid use on porous ground-level substrates
- Protect surface from moisture, condensation, and UV during initial cure
- May discolor under UV exposure