100% solids, two-component super-fast cure moisture vapor barrier epoxy coating. Used as a primer, bonding agent, or topcoat over concrete and various finished flooring (e.g., vinyl, hardwood). Designed for rapid cure in ambient and low temperatures. Controls vapor emission up to 25 lb./24 hr./1000 ft². Delivers excellent mechanical and chemical resistance.
- Dense, moisture-resistant, and easy-to-clean surface
- Allows multiple recoats with excellent adhesion
- Strong adhesion on various substrates
Item | Value |
Packaging | 11.35 L (3 US gal), 56.7 L (15 US gal) |
Part A Color | Upon Request |
Part B Color | Clear to Amber |
Mixed Color | Upon Request |
Recommended Thickness | Primer: 8 mils (200 ft²/gal); Finish Coat: 16 mils (100 ft²/gal) |
Slurry (12 mils, 50% sand) | 125 ft² |
Trowel (24 mils, 85% sand) | 60 ft² |
Shelf Life | 12 months (sealed, away from heat/moisture/light) |
Mix Ratio by Volume | 2A:1B (100:50) |
Mix Ratio by Weight | Clear: 100:44; Colored: 100:42 |
Gel Time (100 g @ 25°C) | 10–15 minutes |
Pot Life (100 g @ 25°C) | 5–10 minutes |
Solids by Weight/Volume | 100% / 100% |
VOC | 23 g/L |
Thinner Recommended | Xylene |
Component | Clear (cP) | Colors (cP) |
Part A | 1200–1400 | 1400–1600 |
Part B | 200–400 | 200–400 |
Mix | 800–1000 | 1000–1400 |
Property | Value |
Specific Gravity – Part A | 1.14 (Clear), 1.15–1.20 (Color) |
Specific Gravity – Part B | 0.9–1.0 |
Bond Strength (ASTM D4541) | >300 psi (substrate ruptures) |
Shore D Hardness (ASTM D2240) | 85–90 |
Abrasion Resistance (ASTM D4060) | 0.10 g loss (CS17, 1000g, 1000 cycles) |
Tensile Strength (ASTM D638) | 5500 psi |
Compressive Strength (ASTM D695) | 12000–13000 psi |
Elongation (ASTM D638) | 6–7% |
Moisture Vapor Emission Rate (ASTM E96) | 25 lb./24 hr./1000 ft² |
Fire Rating (ASTM E84 / CAN/ULC S102) | Flame Spread: 5; Smoke Developed: 94 (Class A) |
Temp | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | 48 hrs | 5 days | 10 days |
20°C (68°F) | 1 day | 3 days | 5 days |
30°C (86°F) | 12 hrs | 1 day | 3 days |
RESTRICTIONS
- Application temp: 15°C–30°C (59°F–86°F)
- Max RH: 85%
- Concrete moisture content may exceed 4%
- Avoid use on porous ground-level substrates or in high humidity
- Protect surface for first 24 hrs (humidity, water, condensation)
- UV exposure may cause discoloration