100% solids, two-component self-leveling epoxy coating used to restore concrete floors and enhance appearance. Can be customized with colors or metallic pigments to create opaque, glossy finishes. Offers excellent mechanical strength, chemical resistance, and resistance to crystallization.
- Minimum 10 mils application yields smooth finish (or orange peel texture)
- VOC-free interior application without harmful odors
- Impermeable, seamless, and anti-slip
- Easy to clean and resistant to bacteria and moisture
- Excellent adhesion to various substrates
- Allows multiple recoats with strong bonding
- Seamless coves possible using SCI-100-COVE
- Controls contamination
Item | Value |
Packaging | 11.34 L (3 US gal), 15.9 L (4.2 US gal), 56.7 L (15 US gal) |
Color (Part A) | Upon Request |
Color (Part B) | Clear to Amber |
Mixed Color | Same as Part A |
Recommended Thickness | Primer: SCI-100 (16 mils / 200 ft²/gal), Finish Coat: SCI-100 (10 mils / 160 ft²/gal) |
Shelf Life | 12 months (sealed, dry, cool, shaded) |
Mix Ratio by Volume | A:B = 2:1 |
Mix Ratio by Weight | Clear: 100:45.6, Colored: 100:44 |
Pot Life (150 g @ 25°C) | 50–60 minutes |
VOC | Not specified (100% solids) |
Solids Content by Weight | 100% |
Thinner Recommended | Xylene |
Component | Clear (cP) | Colored (cP) |
Part A | 2500–2700 | 2700–3200 |
Part B | 20000–23000 | 20000–23000 |
Mix | 6500–7000 | 7000–7500 |
Property | Value |
Bond Resistance (ASTM D4541) | 268 psi (substrate failure) |
Permeability (ASTM D570) | 0.3% |
Hardness (Shore D, ASTM D2240) | 85–90 |
Tensile Strength (ASTM D638) | 5500 psi |
Compressive Strength (ASTM D695) | 6800 psi |
Elongation (ASTM D638) | 6.7% |
Abrasion Resistance (ASTM D4060) | 0.10 g loss (CS17/1000g/1000 cycles) |
Fire Rating (CAN/ULC S102) | Flame Spread: 5; Smoke: 94 |
Temp | Min | Max |
10°C (50°F) | 16 hrs | 48 hrs |
20°C (68°F) | 8 hrs | 24 hrs |
30°C (86°F) | 6 hrs | 24 hrs |
Temp | Foot Traffic | Light Traffic | Full Cure |
10°C (50°F) | 30 hrs | 5 days | 10 days |
20°C (68°F) | 24 hrs | 3 days | 7 days |
30°C (86°F) | 16 hrs | 2 days | 5 days |
RESTRICTIONS
- Application temperature: 10°C–30°C (50°F–86°F)
- Max RH: 85%
- Substrate temp must be ≥3°C above dew point
- Substrate moisture content <4%
- Not for porous surfaces with potential moisture transfer
- Requires moisture barrier if applied without one
- Protect surface from moisture for 48 hours
- May discolor under UV exposure